1-1825006-3

1-1825006-3

  • Description:SWITCH SLIDE DIP SPST 0.025A 24V
  • Series:GDS
  • Mfr:TE Connectivity ALCOSWITCH Switches
  • Package:Tube

SKU:01e858801940 Category: Brand:

ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:chipapexlimited@gmail.com
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

*
*
*
*
Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

Product Detailed Parameters

  • Description:SWITCH SLIDE DIP SPST 0.025A 24V
  • Series:GDS
  • Mfr:TE Connectivity ALCOSWITCH Switches
  • Package:Tube
  • Circuit:SPST
  • Number of Positions:8
  • Current Rating (Amps):25mA
  • Voltage Rating:24VDC
  • Actuator Type:Slide (Standard)
  • Actuator Level:Flush, Recessed
  • Contact Material:Copper Alloy
  • Contact Finish:Gold
  • Height Above Board:0.114" (2.90mm)
  • Mounting Type:Through Hole
  • Termination Style:PC Pin
  • Pitch:0.100" (2.54mm), Full
  • Washable:Yes
  • Features:Tape Seal
  • Operating Temperature:-30°C ~ 85°C

Download product information

1-1825006-3

Buying Guide
Summary

TE Connectivity ALCOSWITCH Switches 1-1825006-3 is evaluated in DIP Switches category where failure modes and qualification evidence matter as much as headline ratings. Key specs include Description (SWITCH SLIDE DIP SPST 0.025A 24V), Temperature (-30°C ~ 85°C), Mounting (Through Hole), and Packaging (Tube).

Selection Notes
  • For 1-1825006-3, verify the switch configuration (SPST) is correct for your intended control path.
  • Confirm current consumption (25mA) is within your worst-case power budget.
  • Verify the operating temperature range (-30°C ~ 85°C) and derate as needed in your application.
Alternates & Substitutions
  • For DIP Switches, treat alternates as an integration task and validate the assumptions that matter on the assembled system.
  • Then confirm the operating envelope (temperature -30°C ~ 85°C) with margin for transients and derating.
  • For relays/switches, match contact form SPST and derate for inductive loads and inrush current.
  • Confirm startup states and fault behavior are equivalent so the alternate does not change system behavior during brownouts or resets.
FAQ

What details help you quote 1-1825006-3 quickly?
Send the part number (1-1825006-3), quantity, target delivery date, and any required packaging or documentation.

What Circuit does 1-1825006-3 have?
SPST

Which Pitch is specified for 1-1825006-3?
0.100" (2.54mm), Full

Which supply current is specified for 1-1825006-3?
25mA

Application Scenarios

TE Connectivity ALCOSWITCH Switches 1-1825006-3 is listed under the DIP Switches category and is commonly used when correctness, reliability, and qualification repeatability matter. A robust switching choice typically reduces intermittent issues by staying stable under contamination, vibration, and repetitive surges. Engineers often prioritize testability and clear failure behavior so service diagnostics remain straightforward. In real deployments, across automotive power routing, switching must handle inductive loads and transients while maintaining EMI margins. Within automotive steering and console controls, switching must tolerate vibration and thermal cycling without intermittent contact faults. In elevators and access systems, interlocks and limit switches require predictable behavior because nuisance faults translate to downtime.

Compatibility Advice
  • In board-level integration, verify the fail-safe state is well-defined under broken wire, stuck actuator, and partial cable pull conditions. This keeps acceptance criteria measurable and repeatable.
  • For DIP Switches, to avoid late surprises, validate bounce and timing behavior in the full chain so control logic does not see false transitions. This avoids one-off tuning in production.
  • For DIP Switches, check derating and thermal rise for continuous duty so performance does not drift after heat soak with the real source, load, and wiring.
Project Fit
  • Strongest fit when you can bench-verify TE Connectivity ALCOSWITCH Switches 1-1825006-3 for DIP Switches integration on the assembled PCB, and you want reliable field service with clear wiring and labeling.
1-1825006-31-1825006-3

Click on the inquiry