Z8FS040BSB20EG

Z8FS040BSB20EG

$2.55
  • Description:IC MCU 4KB FLASH 8SOIC
  • Series:ZMOTION®

SKU:2947d5bb74d0 Category: Brand:

  
  • Quantity
    • -
    • +
  •    
ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:chipapexlimited@gmail.com
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

*
*
*
*
Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

Product Detailed Parameters

  • Description:IC MCU 4KB FLASH 8SOIC
  • Series:ZMOTION®
  • Mfr:Zilog
  • Package:Tube
  • Applications:Infrared Motion Detection
  • Core Processor:eZ8®
  • Program Memory Type:FLASH (4kB)
  • Controller Series:Z8 Encore! XP®
  • RAM Size:256 x 8
  • Interface:UART/USART
  • Number of I/O:5
  • Voltage - Supply:2.7V ~ 3.6V
  • Operating Temperature:-40°C ~ 105°C
  • Mounting Type:Surface Mount
  • Package / Case:8-SOIC (0.154", 3.90mm Width)
  • Supplier Device Package:8-SOIC
  • Grade:-
  • Qualification:-

Download product information

Z8FS040BSB20EG

Buying Guide
Summary

Zilog Z8FS040BSB20EG is used in Application Specific Microcontrollers category in embedded designs where toolchain fit and peripheral availability drive integration risk. Key specs include Description (IC MCU 4KB FLASH 8SOIC), Core (eZ8®), RAM (256 x 8), I/O (5), and Temperature (-40°C ~ 105°C).

Selection Notes
  • For Z8FS040BSB20EG, confirm the supply voltage requirement (2.7V ~ 3.6V) and any rail tolerance constraints.
  • Check the I/O count (5) against your firmware pin assignment plan.
  • Validate the operating temperature range (-40°C ~ 105°C) for your environment and margin.
Alternates & Substitutions
  • For Application Specific Microcontrollers, compare the datasheet test conditions behind key specs and re-check the margins that were tightest during bring-up.
  • Verify the alternate stays within supply 2.7V ~ 3.6V, temperature -40°C ~ 105°C across startup, load steps, and worst-case temperature.
  • For MCU/memory substitutions, match interface UART/USART, memory 256 x 8 and verify pin-mux, timing margins, and power sequencing.
  • If you need a second source, provide (package 8-SOIC (0.154", 3.90mm Width), supply 2.7V ~ 3.6V, interface UART/USART) and we will suggest options to evaluate under a clear test plan.
FAQ

What are common selection points for a microcontroller like Z8FS040BSB20EG?
Check flash/RAM headroom, peripheral set, connectivity options, package constraints, and availability for your production horizon.

Which Applications is specified for Z8FS040BSB20EG?
Infrared Motion Detection

Can you confirm the operating temperature range for Z8FS040BSB20EG?
-40°C ~ 105°C

Which supply voltage range is specified for Z8FS040BSB20EG?
2.7V ~ 3.6V

Application Scenarios

Zilog Z8FS040BSB20EG is listed under the Application Specific Microcontrollers category and is commonly used when correctness, reliability, and qualification repeatability matter. In real deployments, they commonly sit at the center of sensor fusion, protocol processing, or deterministic control loops where latency and reliability matter. In real deployments, well-matched compute devices reduce software complexity by providing the right hardware acceleration and I/O integration. In practice, after interfaces and margins are defined, teams validate the design on the actual board rather than relying on typical conditions. In medical devices, deterministic processing and audit logging support regulated workflows and long-term maintainability. Within building automation, they aggregate sensor data and run local logic to keep systems functional even when cloud connectivity is intermittent. In real deployments, repeatability across temperature, load, and noise is what keeps performance consistent.

Compatibility Advice
  • In board-level integration, validate power rail sequencing and decoupling close to the pins so brownouts and erratic resets are avoided. This keeps integration from depending on typical-only conditions.
  • With the real source, load, and wiring, confirm boot strapping, reset sequencing, and programming access so bring-up and recovery are deterministic across builds. This keeps integration from depending on typical-only conditions.
  • Validate that alternate parts preserve boot modes, memory interfaces, and critical timing assumptions rather than only pinout before committing to volume builds.
Project Fit
  • Good fit when you can test and document Zilog Z8FS040BSB20EG for Application Specific Microcontrollers integration with production-like fixtures, and you can control power sequencing and decoupling so brownouts and erratic resets are avoided.
  • Poor fit when programming and debug access are not practical, increasing field recovery risk, because repeatable production verification is not feasible.
Z8FS040BSB20EGZ8FS040BSB20EG
$2.55
Buy Now