Isolators

Isolators

Isolators are components used to transmit signals across two sections of a circuit that must remain electrically separated for safety, noise immunity, or functional reasons. This electrical separation—called galvanic isolation—prevents current flow while still allowing data or control signals to pass through. Isolators are especially important in high-voltage or noisy environments, such as industrial automation, motor control systems, or medical electronics. Isolators are signal-level devices that facilitate safe communication between subsystems without direct electrical contact. There are two primary types of isolators: optical isolators (also known as optocouplers) and digital isolators. Optical isolators use light to transmit information across an isolation barrier. A typical optocoupler consists of an LED on the input side and a phototransistor, photodiode, SCR, or Triac on the output side. When current flows through the LED, it emits light that activates the output component, allowing the signal to be reproduced on the isolated side. Optocouplers are widely used in applications requiring moderate speed and high-voltage isolation—such as microcontroller interfaces, SMPS (switch mode power supply) feedback loops, or PLC input modules. They are favored for their simplicity and excellent electrical noise immunity. Digital isolators, on the other hand, do not rely on light. Instead, they typically use capacitive or magnetic coupling to transmit digital signals across the isolation barrier. These isolators offer several advantages over optocouplers, including higher data rates, lower power consumption, better temperature stability, and longer lifespan since they avoid LED aging. Digital isolators are particularly well-suited for high-speed communication interfaces like SPI, I²C, or UART, where timing and signal integrity are critical. However, they may be more sensitive to certain types of transient interference, depending on the design and application. Choosing between an optical and a digital isolator depends on several factors: signal type (analog or digital), speed, voltage isolation requirements, environmental conditions, and reliability expectations. For example, optocouplers might still be preferred in high-voltage analog feedback paths due to their robust noise immunity, while digital isolators may be better suited for fast, compact, low-power digital systems.

Screen Default Ranking Price By Date
Select productsMfrDescriptionPackageSupplier Device PackageMounting TypeSeriesOperating Temperature
14230236011
14230236011
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-DIPTube6-DIPThrough HoleWL-OCTR-40°C ~ 100°C
14230236111
14230236111
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-DIPTube6-DIPThrough HoleWL-OCTR-40°C ~ 100°C
14230236301
14230236301
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-SMDTape & Reel (TR),Cut Tape (CT)6-SMDSurface MountWL-OCTR-40°C ~ 100°C
14230316011
14230316011
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-DIPTube6-DIPThrough HoleWL-OCTR-40°C ~ 100°C
14230316111
14230316111
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-DIPTube6-DIPThrough HoleWL-OCTR-40°C ~ 100°C
14230316301
14230316301
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-SMDTape & Reel (TR),Cut Tape (CT)6-SMDSurface MountWL-OCTR-40°C ~ 100°C
14230326011
14230326011
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-DIPTube6-DIPThrough HoleWL-OCTR-40°C ~ 100°C
14230326111
14230326111
$0.69000
Würth ElektronikOPTOISOLATOR 5KV TRIAC 1CH 6-DIPTube6-DIPThrough HoleWL-OCTR-40°C ~ 100°C
Add ComparisonUp to 4 can be added