10AX022E3F27I1HG

10AX022E3F27I1HG

$1,026.85
  • Description:IC FPGA 240 I/O 672FBGA
  • Series:Arria 10 GX

SKU:f5bb931a96cd Category: Brand:

  
  • Quantity
    • -
    • +
  •    
ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:chipapexlimited@gmail.com
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

*
*
*
*
Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

Product Detailed Parameters

  • Description:IC FPGA 240 I/O 672FBGA
  • Series:Arria 10 GX
  • Mfr:Altera
  • Package:Tray
  • Number of LABs/CLBs:80330
  • Number of Logic Elements/Cells:220000
  • Total RAM Bits:13752320
  • Number of I/O:240
  • Voltage - Supply:0.87V ~ 0.93V
  • Mounting Type:Surface Mount
  • Operating Temperature:-40°C ~ 100°C (TJ)
  • Package / Case:672-BBGA, FCBGA
  • Supplier Device Package:672-FBGA (27x27)
  • Grade:-
  • Qualification:-

Download product information

10AX022E3F27I1HG

Buying Guide
Summary

Altera 10AX022E3F27I1HG is used in FPGAs (Field Programmable Gate Array) category where interface timing, endurance expectations, and power behavior affect reliability. Key specs include Description (IC FPGA 240 I/O 672FBGA), Temperature (-40°C ~ 100°C (TJ)), Package/case (672-BBGA, FCBGA), Mounting (Surface Mount), and Packaging (Tray).

Selection Notes
  • For 10AX022E3F27I1HG, verify the I/O count (240) is sufficient for your interfaces and control signals.
  • Verify the operating temperature range (-40°C ~ 100°C (TJ)) and derate as needed in your application.
  • Confirm Number of LABs/CLBs (80330) meets your design constraints and system-level expectations.
Alternates & Substitutions
  • For FPGAs (Field Programmable Gate Array), treat alternates as an integration task and validate the assumptions that matter on the assembled system.
  • Make sure the alternate stays inside your system envelope: supply 0.87V ~ 0.93V, temperature -40°C ~ 100°C (TJ).
  • Keep the assembly and footprint constraints consistent (package/case 672-BBGA, FCBGA, supplier package 672-FBGA (27x27), mounting Surface Mount) to avoid a late PCB change.
  • For MCU/memory substitutions, verify interface timing and power sequencing, then validate firmware behavior under worst-case conditions.
FAQ

Who is the manufacturer of 10AX022E3F27I1HG?
Altera

What Number of I/O does 10AX022E3F27I1HG have?
240

What Supplier Device Package is listed for 10AX022E3F27I1HG?
672-FBGA (27x27)

What mounting type does 10AX022E3F27I1HG use?
Surface Mount

Application Scenarios

Altera 10AX022E3F27I1HG shows up under FPGAs (Field Programmable Gate Array) when designers want a well-bounded, datasheet-driven building block instead of a fragile board-level workaround. They are generally valuable when interface compatibility and hardware timing must be guaranteed rather than "best effort". They are often used when timing closure and interface robustness need to be provable on the bench and repeatable in production. In aerospace electronics, predictable propagation and stable thresholds support qualification evidence. Within test fixtures, gating simplifies stimulus routing so measurement steps remain repeatable across cycles and operators. In control and timing paths, simple gating enforces sequencing and interlocks where deterministic hardware behavior is preferred over firmware.

Compatibility Advice
  • To keep validation repeatable, validate startup states and default pin configurations so connected peripherals do not enter unsafe modes at reset. This keeps qualification evidence reproducible later.
Project Fit
  • Usually not a good fit when integrating Altera 10AX022E3F27I1HG for FPGAs (Field Programmable Gate Array), default states and enable sequencing are ambiguous, increasing bus contention risk at reset, because integration risk stays high when key margins cannot be measured.
10AX022E3F27I1HG10AX022E3F27I1HG
$1,026.85
Buy Now